User's Manual

ManualsBrandsSercomm ManualsElectronics9962 Multi-Standard AP Metro Cell Indoor

Table Of Contents

Commissioning process

Overview

The 9962 MSEC v1.0 supports the following technology combinations:

• One cell of LTE,

• One cell of WCDMA,

• One cell of LTE plus one cell of WCDMA.

In any of these configurations the 9962 MSEC v1.0 simultaneously supports Wi-Fi thanks

to the integrated Wi-Fi module that supports 802.11n operation.

Purpose

This section outlines the 9962 MSEC v1.0 zero-touch commissioning process.

Related information

If any problems occur during the commissioning process refer to the following document

for more details:

• Alcatel-Lucent 9962 Multi-standard Enterprise Cell v1 - Technical Description and

Troubleshooting Guide, 3MN-02001-0003-DEZZA

Before you begin

The 9962 MSEC v1.0 is intended to be installed and then left unattended so the LED

pattern activated in the commissioning process is mainly focused on indicating that the

installation and initial network connection have succeeded and that the access point is

properly functioning.

9962 MSEC v1.0 access point commissioning

...................................................................................................................................................................................................

Power on the 9962 MSEC v1.0 access point. All LEDs (Power, LTE, WCDMA and GPS)

are solid red: if the software fails to start, the LEDs remain in this condition. Otherwise

the LEDs indicate the progress of the initialization of the unit.

Alcatel-Lucent 9962 Multi-standard Enterprise Cell v1

commissioning

Commissioning process

....................................................................................................................................................................................................................................

3-2

Alcatel-Lucent 9962 MSEC v1.0

3MN-02001-0002-RJZZA

Issue 2.01 September 2015

RELIMINARY