User's Manual

...................................................................................................................................................................................................
2
After approximately 2 minutes the 9962 MSEC v1.0 access point will initialize and
establish IPsec connectivity. During this operation the Power status indicator will blink
slowly. Only red at the beginning then toggling red/green once the access point attempts
to contact DNS Internal for HDM/SAM address resolution.
...................................................................................................................................................................................................
3
After the 9962 MSEC v1.0 access point has established a network connection it will
automatically update its software and configuration database. This process takes
approximately 15 minutes. During this operation the Power indicator will blink green.
...................................................................................................................................................................................................
4
Once the software update has completed the 9962 MSEC v1.0 access point will carry out
an automatic reboot. During reboot the Power indicator will still be blinking green.
...................................................................................................................................................................................................
5
The access point is ready to enable applications and the Power indicator is solid green.
...................................................................................................................................................................................................
6
The 9962 MSEC v1.0 access point starts looking for a GPS signal: the GPS LED is
blinking red.
Important! If GPS signal is not available, the GPS LED turns off.
...................................................................................................................................................................................................
7
A soon as the GPS signal is acquired, the GPS LED goes solid green.
Figure 3-1 9962 MSEC v1.0 front LEDs
Alcatel-Lucent 9962 Multi-standard Enterprise Cell v1
commissioning
Commissioning process
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
Alcatel-Lucent 9962 MSEC v1.0
3MN-02001-0002-RJZZA
Issue 2.01 September 2015
3-3
P
RELIMINARY
P
RELIMINARY