User's Manual

Wireless Access Point User Guide

DHCP Server

 If Enabled, the Access Point will allocate IP Addresses to PCs

(DHCP clients) on your LAN when they start up. The default (and

recommended) value is Enabled.

 The Start IP Address and Finish IP Address fields set the values

used by the DHCP server when allocating IP Addresses to DHCP

clients. This range also determines the number of DHCP clients

supported.

Wins Server

Name/IP Ad-

dress

Enter the server name or IP address of the Wins Server.

TimeZone

Choose the Time Zone for your location from the drop-down list. If

your location is currently using Daylight Saving, enable the Adjust for

Daylight Saving Time checkbox.

You must UNCHECK this checkbox when Daylight Saving Time

finishes.

NTP Server

Name/IP Ad-

dress

Enter the server name or IP address of the NTP.