User's Manual

Wireless Access Point User Guide
18
 802.11b - if selected, only 802.11b connections are allowed.
802.11g wireless stations will only be able to connect if they are
fully backward-compatible with the 802.11b standard.
 802.11g - only 802.11g connections are allowed. If you only have
802.11g, selecting this option may provide a performance im-
provement over using the default setting.
 802.11n - only 802.11n connections are allowed. If you only have
802.11n, selecting this option may provide a performance im-
provement over using the default setting.
 802.11b and 802.11g - this will allow connections by both
802.11b and 802.11g wireless stations.
 802.11n and 802.11g - this will allow connections by both
802.11n and 802.11g wireless stations.
 Mixed 802.11n/802.11g/802.11b - this is the default, and will
allow connections by 802.11n, 802.11b and 802.11g wireless sta-
tions.
Auto Channel
Scan
If "Enable" is selected, the Access Point will select the best available
Channel.
Channel
/Frequency
If you experience interference (shown by lost connections and/or slow
data transfers) you may need to experiment with manually setting
different channels to see which is the best.
Channel Band-
width
Select the desired bandwidth from the list.
Extension
Sub-Channel
Select Above or Below Primary Channel from the list.