User's Manual

Wireless Access Point User Guide

Re-enter to Confirm

Re-enter the desired login password.

Method Screen

Figure 78: Method Screen

Data - Method Screen

Method

Enable Wireless Web

Access

Enable this to allow wireless client access the device.

Enable HTTP

Enable this to allow admin connections via HTTP. If enabled,

you must provide a port number in the field below. Either

HTTP or HTTPS must be enabled.

HTTP Port Number

Enter the port number to be used for HTTP connections to this

device. The default value is 80.

Enable HTTPS

Enable this to allow admin connections via HTTPS (secure

HTTP). If enabled, you must provide a port number in the

field below. Either HTTP or HTTPS must be enabled.

HTTPS Port Number

Enter the port number to be used for HTTPS connections to

this device. The default value is 443.

Enable Management via

SSH

If desired, you can enable this option. If enabled, you will able

to connect to this AP using a SSH client.