User Manual

Wireless Access Point User Guide
30
Advanced Settings - 2.4GHz
Clicking the Advanced link on the menu will result in a screen like the following.
Figure 19: Advanced Settings
Data - Advanced Settings Screen
Basic Rate
Basic Rate Selection
The Basic Rate is used for broadcasting. It does not determine
the data transmission rate, which is determined by the "Mode"
setting on the Basic screen.
Select the desired option:
• Auto-negotiate
- This is the default, and will normally give
the best results.
• Fixed Rate
- If you don't use to use "Auto-negotiate", you
must also select the desired speeds.
Options
Wireless Separation
If enabled, then each Wireless station using the Access Point is
invisible to other Wireless stations. In most business situations,
this setting should be Disabled.
Worldwide Mode
(802.11d)
Enable this setting if you wish to use this mode, and your
Wireless stations support this mode.