User Manual

Wireless Access Point User Guide
32
5GHz Wireless Screens
There are 3 configuration screens available:
•
Basic Settings
•
Security
•
Advanced
Basic Settings – 5GHz (802.11a) Screen
The settings on this screen must match the settings used by Wireless Stations.
Click Basic on the menu to view a screen like the following.
Figure 20: Basic Settings Screen
Data - Basic Settings Screen
Operation
Wireless Mode
Select the desired option:
•
Disable - select this if for some reason you do not this AP to
transmit or receive at all on the 5GHz band.
•
802.11a (54Mbps) - this is the standard 802.11a mode, and is the
most compatible of the available modes.
•
Super 802.11a (108Mbps) - Select this only if all your Wireless
clients support this mode.
•
Dynamic Super 802.11a (108Mbps) - Select this only if all your
Wireless clients support this mode.
•
Static Super 802.11a (108Mbps) - Select this only if all your
Wireless clients support this mode.
Operating Mode
Select the desired mode:
•
Wireless Access Point - operate as a normal Access Point
•
Client Access Point - act as a client for another Access Point. If
selected, you must provide the address (MAC address) of the other
Access Point (Remote AP).
•
Re
p
eater Access Point - act as a re
p
eater for another Access Point.