User Manual

Setup
33
If selected, you must provide the address (MAC address) of the
other Access Point (Remote AP).
Remote AP
MAC Address
This is not required unless the Operating Mode is "Client Access
Point" or "Repeater Access Point". In either of these modes, you must
provide the MAC address of the other AP in this field. You can either
enter the MAC address directly, or, if the other AP is on-line, you can
click the "Select AP" button and select from a list of available APs.
Channel No
If "Automatic" is selected, the Access Point will select the best avail-
able Channel.
If you experience interference (shown by lost connections and/or slow
data transfers) you may need to experiment with manually setting
different channels to see which is the best.
Current Channel
No.
This displays the current channel used by the Access Point.
SSID
Enter the SSID (ESSID). Wireless stations on your Wireless LAN
must have the same SSID.
Broadcast SSID
If Enabled, the SSID will be broadcast to all Wireless Stations. Sta-
tions which have no SSID (or a "null" value) can then adopt the correct
SSID for connections to this Access Point.