User Manual

Introduction
3
Physical Details
Front Panel LEDs
Figure 2: Front Panel
Status On
- Error condition.
Off
- Normal operation.
Blinking
- During start up, and when the Firmware is being upgraded.
Power On - Normal operation.
Off - No power
LAN On
- The LAN (Ethernet) port is active.
Off
- No active connection on the LAN (Ethernet) port.
Flashing
- Data is being transmitted or received via the corresponding
LAN (Ethernet) port.
5GHz/802.11a On
- 802.11a Wireless connection is available.
Off
- No 802.11a Wireless connection available.
Flashing
- Data is being transmitted or received via the 802.11a Wire-
less band. Data includes "network traffic" as well as user data.
2.4GHz/802.11
b/g
On
- 802.11g and/or 802.11b Wireless connection is available.
Off
- 802.11g and 802.11b Wireless connections are not available.
Flashing Data is being transmitted or received via the 802.11g/a Wire-
less band. Data includes "network traffic" as well as user data.