User Manual

Wireless Access Point User Guide
76
SNMP
Figure 62: SNMP Screen
Data - SNMP Screen
SNMP
Enable SNMP
Use this to enable or disable SNMP as required.
Community
Enter the community string, usually either "Public" or "Private".
Access Rights
Select the desired option:
•
Read-only - Data can be read, but not changed.
•
Read/Write - Data can be read, and setting changed.
Managers
Select the desired option:
•
Any station - The IP address of the manager station is not
checked.
•
A specific station - The IP address is checked, and must
match the address you enter in the IP address field provided.
Traps
Select the desired option:
•
Disabled - Select this if you do not wish to use SNMP Traps.
•
Broadcast - Select this to have Traps broadcast on your
network. This makes them available to any PC.
•
Send to - Select this to have Trap messages sent to the
specified PC only. If selected, you must enter the IP Address
of the desired PC.
Trap Version - Select the desired option, as supported by your
SNMP Management program.