User Manual

Appendix B - Troubleshooting
83
Problem 2:
My PC can't connect to the LAN via the Wireless Access Point.
Solution 2
Check the following:
The SSID and WEP settings on the PC match the settings on the Wire-
less Access Point.
On the PC, the wireless mode is set to "Infrastructure"
If using the Access Control feature, the PC's name and address is in the
Trusted Stations list.
If using 802.1x mode, ensure the PC's 802.1x software is configured
correctly. See Chapter 4 for details of setup for the Windows XP 802.1x
client. If using a different client, refer to the vendor's documentation.