User's Manual

Access Point Setup
17
Wireless Settings 11a Screen
The settings on this screen must match the settings used by Wireless Stations.
Click Wireless Settings 11a on the menu to view a screen like the following.
Figure 10: Wireless Settings 11a Screen
Data - Wireless Settings 11a Screen
Wireless LAN
Turn Radio On
Use this checkbox to Enable or Disable this feature as desired.
Operating Mode
Select the desired option:
• 802.11a Only - this is the default, and will allow connections by
802.11a wireless stations.
Channel/Freque
ncy
If "Auto" is selected, the Wireless Access Point will self-select a
Wireless Channel.
If you experience interference (shown by lost connections and/or slow
data transfers) you may need to experiment with different channels to
see which Channel is the best.
Date Rate
This displays the available transmit data rate of the wireless network.
Output Power
Select the desired power output. Higher levels will give a greater
range, but are also more likely to cause interference with other devices.