User's Manual

Wireless Access Point User Guide
18
Wireless Settings 11b/g Screen
The settings on this screen must match the settings used by Wireless Stations.
Click Wireless Settings 11b/g on the menu to view a screen like the following.
Figure 11: Wireless Settings 11b/g Screen
Data - Wireless Settings 11b/g Screen
Wireless LAN
Turn Radio On
Use this checkbox to Enable or Disable this feature as desired.
Operating Mode
Select the desired option:
• Auto (802.11g/802.11b) - this is the default, and will allow
connections by 802.11b and 802.11g wireless stations.
• 802.11b Only - if selected, only 802.11b connections are allowed.
802.11g wireless stations will only be able to connect if they are
fully backward-compatible with the 802.11b standard.
• 802.11g Only - only 802.11g connections are allowed. If you only
have 802.11g, selecting this option may provide a performance
improvement over using the default setting.
Channel/Freque
ncy
If "Auto" is selected, the Wireless Access Point will self-select a
Wireless Channel.
If you experience interference (shown by lost connections and/or slow
data transfers) you may need to experiment with different channels to
see which Channel is the best.
Date Rate
This displays the available transmit data rate of the wireless network.
Output Power
Select the desired power output. Higher levels will give a greater
range, but are also more likely to cause interference with other devices.