User's Manual

Wireless Access Point User Guide
36
Advanced Wireless Settings
Clicking the Wireless Settings link on the Advanced menu will result in a screen like the
following.
Figure 25: Advanced Wireless Settings
Data - Advanced Wireless Settings Screen
Wireless LAN Parameters
Super-A Mode
Check this to enable Super-A mode as required.
Enable WMM Support
Check this to enable WMM (Wi-Fi Multimedia) support in the
Access Point. If WMM is also supported by your wireless
clients, voice and multimedia traffic will be given a higher
priority than other traffic.
RTS/CTS Threshold
Enter the preferred setting between 0 and 2346.
Fragmentation
Enter the preferred setting between 256 and 2346.
Beacon Interval
Enter the preferred setting between 20 and 1000.
DTIM Interval
Enter the preferred setting between 1 and 255.