User's Manual

Wireless Access Point User Guide
38
Data - Advanced Access Point Settings Screen
Access Point Mode
Enable Wireless
Bridging and…
Check this and select the option as required.
• Wireless Point-to-Point Bridge (PTP) - Bridge to a single
AP. You must provide the MAC address of the other AP in
the Remote MAC Address field.
• Wireless Point to Multi-Point Bridge (PTMP) - Select
this only if this AP is the "Master" for a group of Bridge-
mode APs. The other Bridge-mode APs must be set to
Point-to-Point Bridge mode, using this AP's MAC address.
They then send all traffic to this "Master".
• Repeater with Wireless Client Association - Act as a
repeater for another Access Point. If selected, you must
provide the address (MAC address) of the other AP in the
Parent AP MAC Address field. In this mode, all traffic is
sent to the specified AP.
Wireless Point-to-Point Bridge
Enable Wireless Client
Association
Check this to enable this feature as required.
Local MAC Address
It displays the MAC Address of this AP.
Remote MAC Address
Enter the MAC Address of the other AP.
Wireless Point to Multi-Point Bridge
Enable Wireless Client
Association
Check this to enable this feature as required.
Local MAC Address
It displays the MAC Address of this AP.
Remote MAC Address
(1~4)
Enter the MAC Addresses of the other APs.
Repeater with Wireless Client Association
Local MAC Address
It displays the MAC Address of this AP.
Parent AP MAC
Address
Enter the MAC Addresses of the parent AP.
Child AP MAC
Address
This is optional.