User's Manual

Wireless Access Point User Guide

Physical Details

Front Panel LEDs

Figure 2: Front Panel

Power On - Normal operation.

Off - No power

Status On - Error condition.

Off - Normal operation.

Blinking - During start up, and when the Firmware is being upgraded.

LAN

• 100 Link/Act

• On - Corresponding LAN (hub) port is using 100BaseT.

• Off - No active connection on the corresponding LAN (hub) port.

• Flashing - Data is being transmitted or received via the

corresponding LAN (hub) port.

• 10 Link/Act

• Off - No active connection on the LAN (Ethernet) port

• On - Corresponding LAN (hub) port is using 10BaseT.

• Flashing - Data is being transmitted or received via the

corresponding LAN (hub) port.

WLAN 5G

GHZ

On - 802.11a Wireless connection is available.

Off - No 802.11a Wireless connection available.

Flashing - Data is being transmitted or received via the 802.11a Wireless

band. Data includes "network traffic" as well as user data.

WLAN

2.4GHZ

On - 802.11g and/or 802.11b Wireless connection is available.

Off - 802.11g and 802.11b Wireless connections are not available.

Flashing - Data is being transmitted or received via the 802.11b/g

Wireless band. Data includes "network traffic" as well as user data.