User Manual

Setup
23
Security Settings - 802.1x
802.1x can only be used if you have a Radius Server on your LAN.
Selecting the 802.1x option will result in a screen like the following.
Figure 15: 802.1x Settings
Data - 802.1x Screen
802.1x
Radius Server Address
Enter the name or IP address of the Radius Server on your
network.
Radius Port
Enter the port number used for connections to the Radius
Server.
Client Login Name
This read-only field displays the current login name, which is
the same as the name of the Access Point. The Radius Server
must be configured to accept this login.
Shared Key
This is used for the Client Login on the Radius Server. Enter the
key value to match the Radius Server.
WEP Key Size
Select the desired option:
• 64 Bit Encryption - Keys are 10 Hex (5 ASCII) charac-
ters.
• 128 Bit Encryption - Keys are 26 Hex (13 ASCII)
characters.
Key Exchange
Enable this if you want the keys to be updated regularly.
Key Lifetime
This field determines how often keys are dynamically
updated. Enter the desired value.