User Manual

Wireless Access Point User Guide

RTS/CTS Threshold

Enter the preferred setting between 256 and 2346.

Output Power Level

Select the desired power output. Higher levels will give a greater

range, but are also more likely to cause interference with other

devices.

Preamble Type

Select the desired preamble type.

Antenna Selection

If your Access Point has only 1 antenna, there is only 1 option

available. If your Access Point has 2 antennae, select the option

which gives the best results in your location.

802.11b

Protection Type

Select the desired option.

Short Slot Time

Enable or disable this setting as required.

Protection Mode

Normally, this should be left at "Auto".

Protection Rate

Select the desired option.