Installation Guide

6
Charge Battery Pack
Only charge the battery pack indoors with the Micro USB cable provided in the box.
Note:
Only use the battery within environments of -20°C to 40°C (if AC power is connected to
battery pack) or -20°C to 50°C (battery only) :
1. Put the battery pack into the camera.
2. Connect the Micro USB cable to the USB port of the camera.
3. Connect the Plug to the power outlet.
LED on Battery Pack
Color
Status
Solid Green
The charging is complete.
Solid Red
The charging is on-going.
Remove Battery Pack
1. Unclip the Release Slider.
2. Remove the battery pack from the camera.