Installation Guide

7
Installation
1. Place the camera on a flat surface close to a network connection.
2. Check the LED:
● The Power LED should be solid blue while the camera is powering on.
Mounting Installation
Place the camera on a flat surface or mount it on the wall or ceiling.
 Check the network signal strength is sufficient in the place where you want to locate the
camera.
 Avoid placing the camera in an area that gets a lot of light directly into the camera lens.
Wall Mounting
1. Identify the mounting location.
2 Place the mounting plate in the desired location and secure it with three screws.
Note: Use the provided anchors if necessary.
3 Attach the camera onto the stand