User's Manual

2) Press the Doorbell/WPS button of the camera for up to 15 seconds

and on your Wireless device (AP or router) as well to establish a

wireless connection automatically. The wireless connection is

successful when the LED (Amber) is fast blinking.

3) Obtain the IP Address of Doorbell on Wireless device (AP or router)

device page. And start the Internet Explorer. After then enter the IP

Address of Doorbell on the Address box of Internet Explorer (ex.

http://192.168.1.223)

4) When you connect, the following screen will be displayed.

5) Click View Video.

6) The first time you connect to the camera, you will be prompted to

install decoders.

Choose "I accept the terms of the license agreement" and click "OK".

Note: The options can only be configured while using IE browser. Other

browsers can just view the video rather than configuration.

Sercomm Confidential