User's Manual

4
Microphone
The built-in microphone is useful for bi-direction
voice conversation.
PIR
LED
The sensor is used to help the camera to detect
motion within 3 meters.
Doorbell/WPS
Button
This button has three functions:
1. WPS. Push the WPS button on the device
and on your other wireless device to perform
WPS function that easily creates an
encryption-secured wireless connection
automatically.
• WPS PBC Mode. When pressed and
released (up to15 seconds), the Wireless
HD Doorbell Camera will be in the WPS
PBC mode (Auto link mode).
• WPS Pin Code Mode. When pressed
and held for 5-15 seconds, the Wireless
HD Doorbell Camera will be in the WPS
Pin Code mode.
Note: when WiFi is connected, the WPS
button is disabled.
2. Doorbell. Press the button to ring the bell.
3. Power LED (Green/Amber/Blue)
• Off (Green/Amber/Blue)- No power or
sleep mode.
• Breathing (Green) – Intercom mode.
• On (Amber) - If the LED is on for 5
seconds, the WPS function is failed.
• Off (Amber) - WPS pairing is complete if
the LED is off after continuously blinking.
• Slow Blinking (Amber) – WPS PBC
function is active.
• Medium-Speed Blinking (Amber) – WPS
Pin function is active.
• Fast Blinking (Amber) – Driver upgrading
Note：Do not power off the Doorbell while
the driver upgrading.
• On (Blue) - Power on and PIR function is
triggered.
• Off (Blue) - The doorbell button is pressed
by a visitor.
Speaker
This is where the visitor hears your speaking.
Sercomm Confidential