User's Manual

DRG600WiFi User Guide Advanced Features
Page 73 of 104
Properties
Enable Use this to Enable or Disable support for this Server, as required.
PC (Server) Select the PC for this Server. The PC must be running the appropriate Server software.
Protocol Select the protocol (TCP or UDP) used by the Server.
Internal (LAN) Ports Enter the range of port numbers which the Server software is configured to use.
External (WAN) Ports
Traffic from the Internet using this range of port numbers will be sent to the Server.
This is normally the same as the Internal Port Numbers. If it is different, this device will
perform a "mapping" or "translation" function, allowing the server to use a different port
range to the clients.
Clear Form Clear all data from the "Properties" area, ready for input of a new Virtual Server entry.
Update Selected
Server
Update the current Virtual Server entry, using the data shown in the "Properties" area on
screen.
Add as new Server
Add a new entry to the Virtual Server list, using the data shown in the "Properties" area
on screen. The entry selected in the list is ignored, and has no effect.
For each entry, the PC must be running the appropriate Server software.