User's Manual

3. Use a standard LAN cable to connect the PC to the LAN
port on the rear of the Femtocell Router.
Connect the DSL or Cable modem to the WAN port of t
Femtocell Router. Use th
4. he
e cable supplied with your
5. emtocell
he power adapter provided. Using a
e damage.
• wer LED should be ON.
ON.)
The WAN LED should be ON if ADSL line is connected.
DSL/Cable modem. If no cable was supplied, use a
standard cable.
Connect the supplied power adapter to the F
Router. Use only t
different one may cause hardwar
6. Check the LEDs
The Po
• The LAN LED should be ON (provided the PC is also
•
Page 2