User's Manual

• Setup for 3G/UMTS
1. Ensure the Femtocell Router is powered OFF. Select a
suitable place for the Femtocell Router.
2. Attach the supplied antennae.
3. Insert the SIM card into the slot on the back of the device.
4. Use a standard LAN cable to connect the PC to the LAN
port on the rear of the Femtocell Router.
5. Connect the supplied power adapter to the Femtocell
Router. Use only the power adapter provided. Using a
different one may cause hardware damage.
6. Check the LEDs
• The Power LED should be ON.
• The LAN LED should be ON (provided the PC is also
ON.)
• The WLAN LED should be ON.
• The Femto LED should be ON.
Page 3