User Manual

ManualsBrandsSercomm ManualsComputers & Accessories802.11N Wireless ADSL Router

Setup

Options

802.11 Mode

Select the desired mode:

• Off - Wireless function is off.

• 11b - Only 802.11b connections are available. 802.11g Wireless

Stations will only be able to use the Wireless Router if they are

fully backward-compatible with the 802.11b standard.

• 11g - Only 802.11g Wireless stations can use the Wireless Router.

• 11b + 11g - Both 802.11.g and 802.11b Wireless stations will be

able to use the Wireless Broadband Router.

• 11b/g/N (20MHz) - 802.11.g, 802.11b and 802.11n (20MHz)

Wireless stations can use the Wireless Broadband Router.

• 11b/g/N (40MHz) - 802.11.g, 802.11b and 802.11n (40MHz)

Wireless stations can use the Wireless Broadband Router.

Channel No.

Select the Channel you wish to use on your Wireless LAN.

• If you experience interference (shown by lost connections and/or

slow data transfers) you may need to experiment with different

channels to see which is the best.

• If using multiple Access Points, adjacent Access Points should use

different Channels to reduce interference.

Extension

Channel

Select either UP or DOWN from the list.

Isolation

between SSID

If Enabled, devices that have the different SSIDs will not be able to

communicate with each other.

WMM Support

Enable or disable this feature as required.

MAC Address Filter

Allow access

by …

Use this feature to determine which Wireless stations can use the

Access Point. The options are:

• All Wireless Stations - All wireless stations can use the access

point, provided they have the correct SSID and security settings.

• Trusted Wireless stations only - Only wireless stations you

designate as "Trusted" can use the Access Point, even if they have

the correct SSID and security settings.

This feature uses the MAC address to identify Wireless stations.

The MAC address is a low-level network identifier which is

unique to each PC or network device.

To define the trusted wireless stations, use the "Set Stations" but-

ton.

Set Stations

Button

Click this button to manage the trusted PC database.

WiFi Protect Setup

Enable WPS

Enable this if you want to use Wireless WPS function.

AP PIN Code

Click the Regenerate button to have the new pin code in the field.

Input Client PIN

Code

Enter the client’s PIN code in the field and click OK to add the client

device.

PDF created with pdfFactory trial version www.pdffactory.com