User Manual

Setup
31
Binding Screen
The Binding feature is for MultiPVC. If you have enabled multiple PVCs and set the WAN
connection methods individually, you can bind the LAN Ports and WLAN Port to them using
this page. While binding one port to the selected PVC, this port would connect Internet via
this PVC. The PVC port should be configured first or the bound port will not access the
Internet.
While in Modem mode, Bridge connection can only be set for all the PVCs. You can click
MultiPVC Details in the Status screen to see all the information.
Note: When you switch to Modem mode from Router (Modem+Router), all the connection
methods would be changed to Bridge. You may need to reconfigure the Bridge IP/Netmask
through wizard pages if you want to access the WEB Server via the relevant port.
Figure 21: Binding Screen
Data - Binding Screen
Port 0
This port is always bound to the Primary Internet Connection VC1.
Port 1~3
These ports can be bound to VC2~VC8. If it is not enabled, it would be
bound to VC1 as default.
WLAN
The WLAN Port can be bound to VC2~VC8. If it is not enabled,, it would
be bound to VC1 as default.
VPI/VCI
It displays the current VPI/VCI information of the selected PVC.
Type
It displays the current connection type of the selected PVC.
PDF created with pdfFactory trial version www.pdffactory.com