User Manual

Introduction

Physical Details

Front-mounted LEDs

Figure 2: Front Panel

Power LED

On (Green) - Power on.

Off - No power.

Flashing (Green) - Device is rebooting.

Status On (Amber) - Device error.

LAN

For each port, there are 2 LEDs

• On (Green) - Corresponding LAN (hub) port is using 100BaseT.

• On (Amber) - Corresponding LAN (hub) port is using 10BaseT.

• Off - No active connection on the corresponding LAN (hub) port.

• Flashing - Data is being transmitted or received via the correspond-

ing LAN (hub) port.

Wireless On - Wireless enabled.

Off - No Wireless connections currently exist.

Flashing - Data is being transmitted or received via the Wireless access

point. This includes "network traffic" as well as user data.

ADSL On - ADSL connection established.

Off - No ADSL connection currently exists.

Flashing - ADSL is synchronizing.

Internet On (Green) - Internet connection is available.

Off - No Internet connection available.

On (Amber) - Authentication error.

WPS On - WPS wireless security is enabled.

Off - WPS is not being set or enabled.

Flashing - The device is in the 2-minute interval to synchronize security.

PDF created with pdfFactory trial version www.pdffactory.com