User's Manual

Wireless Router User Guide
58
Connection Status - Telstra Big Pond
An example screen is shown below.
Figure 48: Telstra Big Pond Status Screen
Data - Big Pond Screen
BPA Status
Connection Status
This indicates whether or not the connection is currently estab-
lished.
• If the connection does not exist, the "Connect" button can be
used to establish a connection.
• If the connection currently exists, the "Disconnect" button can
be used to break the connection.
• Normally, it is not necessary to use the Connect and Disconnect
buttons unless the setting "Connect automatically, as required"
is disabled.
IP Address
The IP Address of this device, as seen by Internet users. This
address is allocated by your ISP (Internet Service Provider).
Subnet Mask
The Subnet Mask associated with the IP Address above.
Default Gateway
The IP address of the remote Gateway or Router associated with the
IP Address above.
Buttons
login
If not connected, establish a connection to Telstra Big Pond.
logout
If connected to Telstra Big Pond, terminate the connection.