User's Guide

Access Point Mode
Status Screen
In Modem mode, the Status screen looks like the example below.
Figure 68: Status Screen - Bridge Mode
Data - Status Screen (Bridge Mode)
LAN
IP Address
The IP Address of the Wireless ADSL Router.
Network Mask
The Network Mask (Subnet Mask) for the IP Address above.
MAC Address
This shows the MAC Address for the Wireless ADSL Router, as
seen on the LAN interface.
Wireless
Region
The current region, as set on the Wireless screen.
Channel
This shows the Channel currently used, as set on the Wireless
screen.
Wireless AP
This indicates whether or not the Wireless Access Point feature is
enabled.
Name (SSID 1/2)
It displays the name of the SSID 1/2.
Broadcast Name
This indicates whether or not the SSID is Broadcast. This setting
is on the Wireless screen.
93