User Manual

Wireless Router User Guide
Data - Status Screen
Internet
Connection Method
Displays the current connection method, as set in the Setup
Wizard.
Connection Status
This indicates the current status of the Internet Connection
• Active - Connection exists
• Idle - No current connection, but no error has been detected.
This condition normally arises when an idle connection is
automatically terminated.
• Failed - The connection was terminated abnormally. This
could be caused by Modem failure, or the loss of the connec-
tion to the ISP's server.
If there is an error, you can click the "Connection Details" button
to find out more information.
Internet IP Address
This IP Address is allocated by the ISP (Internet Service Pro-
vider). If using a dynamic IP address, and no connection currently
exists, this information is unavailable.
WAN MAC Address
It displays the MAC address for the WAN.
Connection Details
Click this button to open a sub-window and view a detailed
description of the current connection. Depending on the type of
connection, a "log" may also be available.
LAN
IP Address
The IP Address of the Wireless Router.
Network Mask
The Network Mask (Subnet Mask) for the IP Address above.
DHCP Server
This shows the status of the DHCP Server function. The value
will be "Enabled" or "Disabled".
MAC Address
This shows the MAC Address for the Wireless Router, as seen on
the LAN interface.
Wireless
Region
The current region, as set on the Wireless screen.
Channel
This shows the Channel currently used, as set on the Wireless
screen.
Wireless AP
This indicates whether or not the Wireless Access Point feature is
enabled.
SSID 1/2
It displays the name of the SSID 1/2.
Broadcast Name
This indicates whether or not the SSID is Broadcast. This setting
is on the Wireless screen.
MAC Address
The MAC (physical) address of the Wireless Access Point.
System
Device Name
The current name of the Router. This name is also the "hostname"
for users with an "@Home" type connection.
52