User Manual

4
Chapter 4
Setup - AP/Router Mode
This Chapter provides Setup details for the AP/Router mode of the Wireless
3-in-1 Companion.
Overview
In AP/Router mode, the Wireless 3-in-1 Companion provides the following services:
• Wireless Access Point
• DHCP Server
• Shared IP address
• Firewall Protection for Wireless Stations.
To configure AP/Router mode, you can connect while in Config mode or in AP/Router
mode.
• To connect in Config mode, use the method described in Initial Configuration.
• To connect while in AP/Router mode, use the method below
Connecting while in AP/Router Mode
Ensure that your PC has established a Wireless connection to the Wireless 3-in-1 Companion
before commencing this procedure.
1. Start your Web browser.
2. In the "Location" or "Address", enter "HTTP://" and the current IP address for the Wire-
less LAN, as set on the AP/Router screen. The default value is 192.168.0.1:
HTTP://192.168.0.1
3. If the admin password has been set (on the System screen), you will be prompted for the
username and password.
• Enter
admin for the user name.
• Enter the current password.
4. You will then see the Mode Configuration screen.
Click the "Configure" button for AP/Router Mode.
You will the see the AP/Router Setup Screen.
Note:
By default, the Wireless 3-in-1 Companion will allow both 802.11b and 802.11g connections.
21