User Manual

Operation and Status
IP Address
The IP Address of this device, as seen from the Ethernet (WAN) Port
interface. If using DHCP, and there is no current connection, this will
be blank or 0.0.0.0.
Connection Status
This indicates whether or not the connection is currently established.
• If the connection does not exist, the Connect button can be used
to establish a connection.
• If the connection currently exists, the Disconnect button can be
used to break the connection.
Connection Log
Connection Log
• The Connection Log shows status messages relating to the
existing connection.
• The Clear Log button will restart the Log, while the Refresh
button will update the messages shown on screen.
Buttons
Connect
If not connected, establish a connection to your ISP.
Disconnect
If connected to your ISP, hang up the connection.
Clear Log
Delete all data currently in the Log. This will make it easier to read
new messages.
Refresh
Update the data on screen.
39