User Manual

Table Of Contents

Introduction

Physical Features

Ethernet LED

• On - Ethernet connection established.

• Off - No Ethernet connection.

• Flashing - Data being transferred.

Wireless LED

• On - Wireless interface available.

• Off - Wireless interface unavailable.

• Flashing - Data being transferred.

Power LED

• On - Power is available.

• Off - No power.

Mode Selector

This switch has 4 positions:

1 - AP Mode

2 - AP/Router Mode

3 - Config Mode

4 - Client Mode

Reset Button

This button has 2 functions:

• Restart (reboot) - press & release.

• Set all settings to factory defaults - press & hold (for 8 seconds),

then release.

Note: This should not be done while connected or using the Wire-

less 3-in-1 Companion.

Ethernet Port

Connect the 10/100BaseT ethernet cable here.

• In AP mode or AP/Router mode, this is connected to the LAN or

WAN.

• In Config mode, this should be connected to your PC.

• In Client mode, this is connected to your PC.

Power

Connect the supplied power adapter here.