User Manual

Rear Panel
Antennae One antenna is supplied. Best results are usually obtained with the
antennae in a vertical position.
Reset
Button
This button has two (2) functions:
Reboot. When pressed and released, the Wireless Access Point will reboot
(restart).
Reset to Factory Defaults. This button can also be used to clear ALL data
and restore ALL settings to the factory default values, as follows:
1. Power off the Access Point.
2. Hold the Reset Button down while you Power On the Access Point.
3. Continue holding the Reset Button until the Status (Red) LED blinks
TWICE.
4. Release the Reset Button.
The factory default configuration has now been restored, and the Access
Point is ready for use.