User Manual

WPS
Button
The button is for WPS function:
After pressed and released, router enter into mode which can support WPS
client to connect
Ethernet
LAN
Use a standard LAN cable (RJ45 connectors) to connect this port to a
10BaseT or 100BaseT hub on your LAN.
Ethernet
WAN
Use a standard LAN cable (RJ45 connectors) to connect this port.
In AP mode, connect this port to a 10BaseT or 100BaseT hub on your
LAN.
In Router mode, connect this port to a DSL modem
Power port Connect the supplied power adapter here.
2. Installation
1. Select a suitable location for the installation of your Wireless Access Point. To
maximize reliability and performance, follow these guidelines:
• Use an elevated location, such as wall mounted or on the top of a cubicle.
• Place the Wireless Access Point near the center of your wireless coverage area.
• If possible, ensure there are no thick walls or metal shielding between the Wireless
Access Point and Wireless stations.
2. Use a standard LAN cable to connect the “LAN” port on the Wireless Access Point to
a 10/100BaseT hub on your LAN.