User Manual

Note:
The CD-ROM contains a Windows utility which can be used to assist setup.
4. Client (PC) Configuration
WEP/WPA-PSK Mode
Each Wireless Station must have the same settings as the Wireless Access Point.
Mode On each PC, the mode must be set to Infrastructure.
SSID
(ESSID)
This must match the value used on the Wireless Access Point.
The default value is default
Note! The SSID is case sensitive.
WEP
WPA-PSK
If WEP or WPA-PSK is enabled on the Wireless Access Point, each
station must use the same settings as the Wireless Access Point.