User's Manual

Introduction

Rear Panel

Figure 3: Rear Panel

Power port

Connect the supplied power adapter here.

10/100BaseT

LAN connections

Use standard LAN cables (RJ45 connectors) to connect your PCs to

these ports.

Note:

Any LAN port on the Wireless ADSL Router will automatically

function as an "Uplink" port when required. Just connect any port to

a normal port on the other hub, using a standard LAN cable.

Reset Button

This button has two (2) functions:

• Reboot. When pressed and released, the Wireless ADSL Router

will reboot (restart).

• Clear All Data. This button can also be used to clear ALL data

and restore ALL settings to the factory default values.

To Clear All Data and restore the factory default values:

1. Power Off.

2. Hold the Reset Button down while you Power On.

3. Keep holding the Reset Button for a few seconds, until the RED

LED has flashed TWICE.

4. Release the Reset Button. The Wireless ADSL Router is now

using the factory default values.

WAN port

(ADSL port)

Connect this port to your ADSL line.