User's Manual

PC Configuration

Wireless Station Configuration

This section applies to all Wireless stations wishing to use the Wireless ADSL Router's Access

Point, regardless of the operating system which is used on the client.

To use the Wireless Access Point in the Wireless ADSL Router, each Wireless Station must

have compatible settings, as follows:

Mode

The mode must be set to Infrastructure (rather than Ad-hoc)

Access points only operate in to Infrastructure mode.

SSID (ESSID)

This must match the value used on the Wireless ADSL Router. The

default value is default

Note! The SSID is case sensitive.

WEP By default, WEP on the Wireless ADSL Router is disabled.

• If WEP remains disabled on the Wireless ADSL Router, all stations

must have WEP disabled.

• If WEP is enabled on the Wireless ADSL Router, each station must

use the same settings as the Wireless ADSL Router.