User's Manual

Operation and Status
32
Data - Status Screen
Internet
Modem Status
This indicates the status of the ADSL modem component.
DownStream
Connection Speed
If connected, displays the speed for the DownStream (download)
ADSL Connection.
UpStream
Connection Method
If connected, displays the speed for the UpStream (upload) ADSL
Connection.
Connection Method
This indicates the current connection method, as set in the Setup
Wizard.
Internet Connection
This indicates the current status of the Internet Connection
• Active - Connection exists
• Not connected - No current connection, but no error has
been detected. This condition normally arises when an idle
connection is automatically terminated.
• Failed - The connection was terminated abnormally. This
could be caused by ADSL failure, Router failure, or
termination of the connection by your ISP.
If there is an error, you can click the "Connection Details" button
to find out more information.
Internet IP Address
This IP Address is allocated by the ISP (Internet Service
Provider). If using a dynamic IP address, and no connection
currently exists, this information is unavailable.
LAN
IP Address
The IP Address of the Wireless ADSL Router.
Network Mask
The Network Mask (Subnet Mask) for the IP Address above.
DHCP Server
This shows the status of the DHCP Server function. The value
will be "Enabled" or "Disabled".
MAC Address
This shows the MAC Address for the Wireless ADSL Router, as
seen on the LAN interface.
Wireless
Name (SSID)
If using an ESS (Extended Service Set, with multiple access
points) this ID is called an ESSID (Extended Service Set
Identifier).
Region
The current region, as set on the Wireless screen.
Channel
This shows the Channel currently used, as set on the Wireless
screen.
Wireless AP
This indicates whether or not the Wireless Access Point feature is
enabled.
Broadcast Name
This indicates whether or not the SSID is Broadcast. This setting
is on the Wireless screen.
System
Device Name
The current name of the Wireless ADSL Router. This is also the