User's Manual

Wireless ADSL Router User Guide

• ALLOW by schedule, otherwise Block

Note:

• Any outbound traffic which is not blocked by rules you create

will be allowed by the Default rule.

• ALLOW rules are only useful if the traffic is already covered by

a BLOCK rule. (That is, you wish to allow a subset of traffic

which is currently blocked by another rule.)

• To define the Schedule used in these selections, use the

"Schedule" screen.

LAN Users

Enter the IP address of the PC or Server on your LAN which will

receive the inbound traffic covered by this rule.

WAN Users

These settings determine which packets are covered by the rule,

based on their source (WAN) IP address. Select the desired option:

• Any - All IP addresses are covered by this rule.

• Address range - If this option is selected, you must enter the

"Start" and "Finish" fields.

• Single address - Enter the required address in the "Start" fields.

Log

This determines whether packets covered by this rule are logged.

Select the desired action.

• Always - always log traffic considered by this rule, whether it

matches or not. (This is useful when debugging your rules.)

• Never - never log traffic considered by this rule, whether it

matches or not.

• Match - Log traffic only it matches this rule. (The action is

determined by this rule.)

• Not Match - Log traffic which is considered by this rule, but

does not match (The action is NOT determined by this rule.)