User's Manual

Wireless ADSL Router User Guide
4
Physical Details
Front-mounted LEDs
Figure 2: Front Panel
Power LED On - Power on.
Off - No power.
Status (Red)
LED
On - Error condition.
Off - Normal operation.
Blinking - This LED blinks during start up, and during a Firmware
Upgrade.
LAN
For each port, there are 2 LEDs, to indicate the connection speed
(10BaseT or 100BaseT) of each port.
If neither LED is on, there is no active connection on the corresponding
LAN port.
WLAN LED On - Idle.
Off - Error - No Wireless connection available.
Flashing - Data is being transmitted or received via the Wireless access
point. This includes "network traffic" as well as user data.
WAN On - ADSL connection to your ISP is established.
Off - No ADSL connection to your ISP.
Flashing - Data is being transmitted or received via the ADSL connection.