User's Manual

Setup

3. On the VC1 screen, shown below, enter the VPI and VCI values provided by your ISP,

then click "Next".

Figure 6: Setup Wizard - VC1

Figure 7: Setup Wizard - Internet Access

4. On the Internet Access Screen, shown above, select the correct connection type, as used

by your ISP. Click "Next" and complete the configuration for your connection method.

• You need the data supplied by your ISP. Your ISP's data will also have the DSL

Multiplexing Method ( LLC or VC )

• The common connection types are explained in the following table..