User's Manual

Setup
21
Allow access
by …
Use this feature to determine which Wireless stations can use the
Access Point. The options are:
• All Wireless Stations - All wireless stations can use the access
point, provided they have the correct SSID and security settings.
• Trusted Wireless stations only - Only wireless stations you
designate as "Trusted" can use the Access Point, even if they have
the correct SSID and security settings.
This feature uses the MAC address to identify Wireless stations.
The MAC address is a low-level network identifier which is
unique to each PC or network device.
To define the trusted wireless stations, use the "Set Stations"
button.
Set Stations
Button
Click this button to manage the trusted PC database.
WiFi Protect Setup
WPS Enable
Enable this if you want to use Wireless WPS function.
WPS-Configure
Click this button to open a sub-screen where you can modify the
"WPS" settings. See the following section for more details.
WPS
Configurable
Select the desired option:
Enabled - Select this if you want to configure wireless through WPS.
Disabled -WPS is unconfigurable.
WiFi Protect Setup
Click WPS-Configure on the Wireless screen to view a screen like the following.
Figure 12: WiFi Protect Setup Screen
Data - WiFi Protect Setup Screen
WPS PIN
Enrollee’s PIN
Enter the PIN code and click Add Client to AP to add the client device.
Device’s PIN
Click the Generate Device’s Pin button to have the new pin code
displayed in the field.