User Manual

HomePlug 802.11g Access Point User Guide
8
IP Address
Your PC needs to have an IP address which is compatible with the HomePlug 802.11g Access
Point. The default IP address and subnet mask for the HomePlug 802.11g Access Point are:
IP address 192.168.0.101
Subnet Mask 255.255.255.0
To perform initial configuration, you will need to set your PC to use a fixed IP address which is
compatible with this IP address ( e.g. 192.168.0.100 ) and using the same Subnet Mask
( 255.255.255.0 ).
See Appendix C - Windows TCP/IP Setup for details of this procedure.
Configuration
1. Start your Web browser. You must use a Browser which supports frames and JavaScript.
2. In the Address box, enter "HTTP://" and the IP Address of the HomePlug 802.11g Access
Point
e.g.
HTTP://192.168.0.101
3. You should then see a login prompt, which will ask for a User Name and Password.
Enter admin for the User Name, and leave the Password blank.
These are the default values. The password (but not the user name) can and should be
changed. Always enter the current password, as set on the Password screen.
Figure 4: Password Dialog
4. You will then see the Status screen, which displays the current settings and status. No data
input is possible on this screen.
5. From the menu, select and configure the following options, as described in the following
sections:
HomePlug Settings
Wireless Settings
LAN IP Setup
Set Password