User Manual
HomePlug 802.11g Access Point User Guide
12
Data - HomePlug Settings
Network Password
HomePlug
Network Password
Enter the Network Password for your HomePlug network here.
All HomePlug devices must use the same Network Password.
• This password is case-sensitive.
• All HomePlug devices must use the same Network Pass-
word.
• The password can contain letters, numbers or punctuation.
• The password must be at least 4 characters.
HomePlug Stations
Station List This list is used if you wish to use the HomePlug 802.11g Ac-
cess Point to assign the same Network Password to other
HomePlug stations.
If you don't wish to do this, there is no need to input your other
HomePlug stations here.
Device Passcode Use this to add a HomePlug station to the list:
1. Enter the HomePlug's Default Passcode in the Device
Passcode field. Each HomePlug station has a unique Pass-
code in the format xxxx-xxxx-xxxx-xxxx, usually shown on a
label on the rear or base.
2. Click the Add to List button.
3. When finished, click the Save button to save the list.
Select All
Button
Click this button to select all HomePlug stations in the list. You
can also select stations individually if desired.
Set Network Password
Button
Click this button to assign the current network password to all
selected HomePlug stations. Wait a few seconds for the mes-
sage regarding the success of this operation.
Delete
Button
Click this button to delete all selected HomePlug stations.