User Manual

HomePlug 802.11g Access Point User Guide
18
Set Password Screen
The Set Password screen allows you to assign a password to the HomePlug 802.11g Access
Point. This password limits access to the configuration interface. The default password is blank
(no password). It is recommended that this be changed, using this screen.
Figure 11: Set Password Screen
Data - Set Password Screen
Current Password Enter the current password here. If the current password is
blank, leave this blank.
New Password Enter the new password here
Repeat New Password Re-enter the new password in this field.
You will be prompted for the password when you connect, as shown below.
Figure 12: Password Dialog
• Enter admin for the User Name.
• Enter the HomePlug 802.11g Access Point’s password, as set on the Password screen
above.