User Manual

32
Obtain an IP address from a DHCP Server
This is the default Windows setting. Using this method is recommended. By default, the
HomePlug 802.11g Access Point will act as a DHCP Server.
Using a Fixed or Static IP Address
To use a fixed or static IP address
• Select "Specify an IP address".
• Enter the desired IP Address and Subnet Mask.
• Click "OK"
Each device on your network must have a unique IP address and the same Subnet Mask.
To perform initial configuration of the HomePlug 802.11g Access Point, you can use the follow-
ing values on your PC:
• IP Address: 192.168.0.100
• Subnet Mask: 255.255.255.0
Checking TCP/IP Settings - Windows 2000
1. Select Control Panel - Network and Dial-up Connection.
2. Right click the Local Area Connection icon and select Properties. You should see a screen
like the following:
Figure 21: Network Configuration (Win 2000)
3. Select the TCP/IP protocol for your network card.
4. Click on the Properties button. You should then see a screen like the following.