User Manual
Introduction
3
Physical Description
The HomePlug 802.11g Access Point is illustrated below.
Figure 2: HomePlug Access Point
LEDs
There are three (3) LEDs on the top face on the unit.
Power On - Normal operation.
Off - No power
HomePlug On - The HomePlug network is active. This means that at least one other
HomePlug device was detected.
Off - HomePlug network is not available - no other HomePlug devices were
detected.
Flashing - Data is being transmitted or received via the HomePlug network.
WLAN On - Idle.
Off - Error- Wireless connection is not available.
Flashing - Data is being transmitted or received via the HomePlug 802.11g
Access Point. Data includes "network traffic" as well as user data.