User Manual

HomePlug 802.11g Access Point User Guide
4
Buttons and Switches
Reset Button This button has two (2) functions:
Reboot. When pressed and released, the HomePlug 802.11g Access
Point will reboot (restart).
Clear All Data. This button can also be used to clear ALL data and
restore ALL settings to the factory default values.
To Clear All Data and restore the factory default values:
1. Power Off.
2. Hold the Reset Button down while you Power On.
3. Keep holding the Reset Button for a few seconds, until the RED LED
has flashed TWICE.
4. Release the Reset Button. The HomePlug 802.11g Access Point is now
using the factory default values.
Antenna
Switch
Use this to select either the internal antenna (if connected).
The default is "Internal". This should not be changed to "External" unless
an external antenna is fitted.